Specifications:

1. Platform
(a) Pin-slot for easy pneumatic element installation.
(b) 23.5" x 29.5"

2. Three-Point Assembly: 1 pc
(a) Slide-lock device attached on the bottom
(b) A pressure gauge with a filter and a pressure regulator
(c) 4 mm snap-lock air tube connectors

3. Air Supply Block: 1 pc
(a) Slide-lock attached on the bottom
(b) a check valve
(c) 4 mm snap-lock air tube connector
(d) 9 air outlets

4. Double-Acting Cylinder: 1 pc
(a) I.D.: 20 mm, Length: 100 mm
(b) 4 mm snap-lock air tube connector
(c) slide-lock device attached on the bottom

5. Single-Acting Cylinder: 1 pc
(a) ID: 20 mm, Length: 100 mm
(b) 4 mm snap-lock air tube connector
(c) slide-lock device attached on the bottom

6. One-way Flow Control Valve: 2 pcs
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom

7. 5W/2P Two-way, Pilot-Operated Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom

8. 5W/2P Push Button Operated Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom
(c) Push button mechanism
(d) Spring return mechanism

9. 3W/2P Normally Closed, Push Button Operated Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom
(c) Push button mechanism
(d) Spring return mechanism

10. Delay Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) 0~30 sec adjustable delay setting
(c) can be applied to normally closed or normally open applications
(d) slide-lock device attached on the bottom

11. Shuttle Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached

12. AND-Gate Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom

13. Quick Exhaust Valve: 1 pc
(a) 4 mm snap-lock air tube connector
(b) slide-lock device attached on the bottom

14. Sequence Valve: 1 pc
(a) pressure: 2 ~ 8 bar
(b) 4 mm snap-lock air tube connector
(c) slide-lock device attached on the bottom

15. Pressure Gauge: 1 pc
(a) pressure range: 0 ~ 10 bar
(b) 4 mm snap-lock air tube connector
(c) slide-lock device attached on the bottom

16. PU tube: 50 pcs

17. 3-Way Connector: 2pcs

18. Experiment Manual: 1 pc

Experiments:
1. Introduction to Single-Acting Cylinder
2. Introduction to Double-Acting Cylinder
3. Introduction to Shuttle Valve
4. Introduction to One-way Flow Control Valve
5. Introduction to Quick Relief Valve
6. Introduction to AND-gate Valve
7. Introduction to Flow Direction Control Valve
8. Introduction to Sequence Valve
9. Introduction to Delay Valve

?Copyright 1995~2013 Sun Equipment Corporation. All rights reserved Prices and specs are subject to change without notice.